Perfecting DTF Transfers at Home with an Iron
What You’ll Need
- A flat, stable ironing surface
- A standard household iron with NO steam
- Your Iris DTF transfer and a clean garment
- Parchment paper or a Teflon sheet for protection
Step-by-Step Ironing Instructions
Use your home iron like a pro with these easy steps.
Step 1
Position the Transfer
Lay the DTF film on your garment, design facing up. Cover with parchment paper or a Teflon sheet to protect both your iron and the transfer.
Step 2
Start Pressing
With your iron on its highest setting, press down firmly on one small area at a time. Hold each section for 20–25 seconds—do not slide.
Step 3
Peel the Film
Start from a corner and slowly peel back. If any part lifts, cover again and press for another 10 seconds with firm pressure.
Step 4
Finishing Press
For extra durability and softness, place the parchment back and press again for 10 seconds.
Common Iron Application Questions
Need more help?
Reach out and we’ll walk you through your setup.
Phone
Our Store Location
801 Alpha Dr., Suite #113,
Richardson, TX 75081
